Enkele projecten gerealiseerd door Inspection Technology Europe BV

Contactloos ultrasoon inspectie van honingraat panelen voor de zonnepanelen van de Europese Galileo satelieten.	Lineair array ultrasoon inspecie carbon composite panelen o.a. voor Airbus	Ultrasoon onderzoek van zware Titanium staven met uniek ontworpen barfollower
Off-line inspectie van zware staven	Laboratorium X/Y/Z  C-scan systeem met  en polaire scanmogelijkheid.	Upgrade bestaande lab scanner
In productie testen van Messing stafmateriaal , doorgevoerd door waterbak	Scheurdetectie van wielbouten voor de luchtvaart

Remote pulser receiver system RPR50 (New)

This new 50 MHz system has been developed for applications requiring a compact  pulser receiver close to the transducer. Especially for C-scan systems, robotic applications and other remote situations the RPR50 set is ideal. The performance is absolutely great and outperforms systems like USIP20HR. The system comprises a compect remote pulser/pre-amplifier of just 200 grams, a control module at up to 20 meters of cable and a PC interface card with control software

Call us for full specifications.

Ultimo 2000

A powerful remote pulser receiver for ultrasonic applications with unique features. The low impedance and 5 Volt RF output makes the unit suitable for remote applications with a very long cable between the pulser receiver and main system.

The bandwidth is 40 MHz at 80 dB true gain and the high energy square wave pulser can be controlled from 40 to 400 volt.  The pulser can also be switched to a spike output.

MFD800

Now with real-time backwall follower option

The only complete in-line ultrasonic test system for ultrasonic production testing of bar and billet. Ultrasonic testing of steel, aluminum, aluminium, brass, titanium, plastic and any other material bars and billets are simple with this system.

The MFD800 is an ideal replacement for older mult channels ultrasonic systems like the Staveley Sonic 237.  It includes interfaces for encoders and start stop functions and real time presentation of the acquired data. The MFD800 has been designed for quick system integration including encoder controlled data acquisition, industrial I/O modules all in one system. The mainframe can accomodate up to 8 independent channels, only using the same system clock and sync.

Additional channels or multiplexed pulser receiver are possible with a high degree of flexibility in sequence and  pulser/ receiver combinations. The system is 100% manufactured in the Netherlands  and world wide marketed by Inspection Technology Europe BV  - Allied NDT Engineers.

For more information, click here

Highspeed Automotive Cilinder Scanner

The Cylinder scanner checks the bonding between the lining of the cylinder and the  aluminum of the block. It is designed for manual placement after wich the computer takes over. A fast scan and a good readable C-scan is the result.

The system was originally developed for VAW in Germany and has been in use with good results since 1999.  Demonstrations were given at a major NDT show in Rome in 2000 with lots of interest from various manufacturers.

In-line ultrasonic test system for bars from 10 to 80 mm diameter.

Together with a few Allied Engineers partners we have developed an advanced and efficient test system for round bars , in this case brass. Internal defects such as porosity can be detected in a continuous proces.

The system provided a solution to fully immerse the bar in water which is required for the 8 or 16 transducers which are situated and accurately kept in position in a half circle around the bar. 
Flat bottom holes of 1,2 mm ( #3 fbh) can be easily detected in 80 mm. brass

For more information you can contact us

A simple to install barfollower . The follower section has 2 rollers mount on a free moving follower unit which always keeps the rollers on the bar, even with seriously bent bars. The ultrasonic transducer is placed in the middle of the rollers and can be easily normalized in two directions and adjusted in height.
Sensors indicate end of bar in both directions.

Allied Enginneers have developed a compact high power ultrasonic pulser module and low noise pre-amplfier which can be used for remote pulser receiver applications where long transducer cables are required or where extra amplfication is required.
The pulser can be triggered from the excisting puls output of any type flawdetector. The module gives a powerful square wave puls of maximum 450 Volt with a very high capacity capable to drive large elements.  The square wave can be adjusted for transducer of 4 to 12 MHz, which is mostly used in industrial applications. 
The pre-amplfier has a low noise gain selectable of 6,12 or 18 dB

Power supply 12 VDC
We can supply the printed circuit boards only or built in a small box

Off line bar tester.
A rugged and efficient bar tester for bars from 40 to 500 mm diameter.
Equiped with a multiprobe barfollower

FT3000 afstand / diktemeter
De FT3000 meet met laagfrequent ultrasoon geluid de afstand tot een product. Door van twee zijden te meten kan kontaktloos de dikte van een product worden gemeten. Hierbij wordt automatisch gecompenseerd voor de variaties in de geluidsnelheid in lucht tgv temperatuur , druk en vochtigheid.  De nauwkeurigheid is 0.1 mm maar deze hangt sterk af van het benodigde meetbereik.  Toepassing zijn er in de hout-, schuimplastic/rubber industrie maar ook voor specifieke projecten waar lasermeetsystemen niet toepasbaar zijn.