Wall thickness meters

Inspection Technology Europe represents Dakota and SADT for the Benelux countries. We can offer a variety of thickness meters and practical solutions for the best prices and support.
In many cases special transducers or combinations meter/transducer is required for the best solution.
We have done a lot of research in this field.
Not only for manual testing but also for in-line aplications we can offer a total solution.

Please contact us for more details.
We are currently working on these English pages .

• 

  IBT-12 wall thickness meter

  Only 245 Euro excl VAT

  The IBT-12 is a veryeconomic and universal wall thickness meter suitable for most homogeneous materials.
  The measuring range is 1,2 to over 200 mm in steel with 0.1 mm accuracy.
  It has 11 re-programmed materials  and one location for user calibration on any material.
  Supply including rugged box , coupland fluid and manual.
  Optional bigger carry case with large bottle of couplant for 30 Euro

   

• 

  ST5900 The most simple gauge

  The ST5900 is a very simple to use meter with a separate transducer with cable.
  The meter has been fixed to the sound velocity of steel but it still measures other materials. In the occasion that other materials are measured you can convert the readings with your calculator.
  A good sensitivity for both corrosion testing and thicker wall steel

• 

  MX1MX2

  A very robust and splash water proof meter , suitable for all homogeneaus materials. The MX-1 is meant for user who test the same material all the time to avoid material calibrations in the field or for unique velocity settings when more meters are used. The velocity setting of the MX-1 can be changed with the use of a PC or notebook.
  The MX-2 is similar to the MX-1 but has 8 preset and 2 free programmable velocities
  5 years of warranty on the instrument

   

• 

  IB40EZ

  The IB40is a very economical but powerful thickness meter with excellent properties to detect corrosion and measures from 1 mm steel to 200 mm steel. Both flat steel and tubes down to 10 mm as well as cast steel can be measured thanks to the 4 different transducers available for this meter. The IB40M has a memory for 40 measurments 

   

• 

  MX-3 especially for high sensitivity for critical corrosion

  The MX-3 is extra sensitive at thin material from 0.65 mm and small pitting corrosion.
  The proper selection of the best  transducer for your application is included in the supply of the meter.

  Similar to the MX-3 is the MX-5 and 5DL with additional alarm indicator and RS232. The MX5DL has a memory for 1000 readings
  5 yesrs warranty on the instrument